Mg/Ce-SBA-15的制备及其苯酚甲醇烷基化性能的研究

以Ce-SBA-15为载体,硝酸镁为活性组分前驱体,通过浸渍法制备了Mg/Ce-SBA-15催化剂。利用XRD、N₂吸附-脱附、SEM、EDS、NH₃-TPD、Py-FTIR和TG-DTA手段对催化剂进行表征。结果表明,Mg掺杂并未破坏载体结构,催化剂表面弱酸含量有所增加,L酸增加明显。在固定床反应器中评价了Mg/Ce-SBA-15分子筛催化苯酚甲醇烷基化的反应性能。结果表明,Mg负载量为7%、焙烧温度为550℃、焙烧时间为4.5 h制备的Mg/Ce-SBA-15催化剂催化效果最佳。在反应温度460℃,n（苯酚）：n（甲醇）为1：4,质量空速为3.0 h^-1,常压的条件下,苯酚转化率为80.1%,邻甲酚选择性为86.4%。     

Ce-Co/KIT-6介孔材料的制备及其脱汞性能的研究

以P123表面活性剂为模板,采用硬模板法制备了有序介孔材料KIT-6,以KIT-6为载体,Ce(NO_3)_2·6H_2O和Co(NO_3)_2·6H_2O为Ce和Co源,采用溶液浸渍法制备了负载型Ce-Co/KIT-6介孔材料。在模拟烟气条件下,利用固定床实验台架研究了Ce-Co/KIT-6材料对烟气中的单质汞(Hg0)的脱除性能。采用扫描电镜(SEM)、N_2吸附-脱附(BET)、X射线衍射分析(XRD)、傅里叶红外光谱分析(FT-IR)、氢气程序升温还原(H_2-TPR)以及热重分析(TGA)等方法对材料进行表征。结果表明,Ce和Co在KIT-6孔道内部高度分散,同时材料保持高度有序的孔道结构、比表面积高达495.2 m~2/g,孔径4.6 nm。脱汞实验结果表明,Ce-Co/KIT-6对Hg0的氧化吸附去除效率很高,250℃下对Hg0的氧化吸附去除效率高达95%以上,在这个过程中,O_2的存在明显促进了催化剂的脱汞能力。氧通过Ce-Co价态的变化进入金属结构中,再与汞发生反应是这个过程的主要机理。     

荧光光谱结合表面增强拉曼光谱法研究紫檀芪与人血清白蛋白相互作用

在模拟人体生理条件下,应用荧光光谱和表面增强拉曼光谱法研究了紫檀芪(PTE)与人血清白蛋白(HSA)之间相互作用机制.结果表明,HSA的荧光能被PTE静态猝灭,并伴随有非辐射能量转移作用,两者形成了1:1复合物,结合距离r=1.495 nm,结合常数KA=1.12×104(298 K)、4.07×104(304 K)和2.45×105 L/mol(310 K).表面增强拉曼光谱研究揭示,PTE分子通过甲氧基与HSA进行结合;热力学数据表明,二者间的作用主要为疏水作用;标记竞争实验指出PTE优先结合HSA的位点Ⅲ.三维荧光光谱、同步荧光光谱和表面增强拉曼光谱结果显示,与PTE作用后,HSA构象发生变化,导致色氨酸残基周围环境疏水性降低,但对PTE分子构象影响不大.     

4-甲基-4-氮杂-21E-苯亚甲基-5-孕烯-3,20-二酮类化合物的合成

报道了一种以KF/Al_2O_3催化合成4-甲基-4-氮杂-21E-苯亚甲基-5-孕烯-3,20-二酮类化合物的方法。以黄体酮为原料,经NaIO_4/KMnO_4氧化裂解、胺解关环得到重要中间体4-甲基-4-氮杂-5-孕烯-3,20-二酮,后者在KF/Al_2O_3催化下经克莱森缩合得到目标产物。考察了不同的催化剂、反应温度、催化剂用量对目标产物的影响。条件优化的结果为:n(3)∶n(KF/Al_2O_3)=1∶1,回流状态下反应4 h,产率为56%~68%。此方法适用性好,为4-氮杂甾体苯亚甲基衍生物的合成提供了一种方便而有效的方法。     

飞秒脉冲作用下氯丙烯的多光子解离和电离动力学

The dissociation and photoionization dynamics of C₃H₅Cl were studied at 200, 400, and 800 nm with femtosecond laser pulses. The time-of-flight mass spectra, laser power index and photoelectron images were recorded. At short wavelength (200 nm), ionization of the parent molecule was found to be the dominant channel, while other ions were generated by the dissociation of C₃H₅Cl⁺. With the shift to long wavelength (e.g., 800 nm), fragment ions became dominant, and were generated through the multiphoton ionization of neutral fragments after the photodissociation of C₃H₅Cl. These results imply that photodissociation plays a significant role at long wavelength, because neutral fragments are supposed to be generated from the intermediate states reached by 800 nm photons. At 400 nm, the dissociation on the intermediate states is also critical, but is not as high as that at 800 nm. Taken together, our results demonstrate that the dissociation/ionization behaviors of allyl chloride are wavelength-dependent, and reveal the complex dynamics of allyl chloride at 200, 400 and 800 nm.     

含酯基Gemini表面活性剂在有机醇-水体系中的胶束热力学及聚集行为

采用电导法研究了不同温度下含酯基Gemini表面活性剂在纯水和在质量分数为10%的甲醇-水(MAWR),乙二醇-水(EG-WR),丙三醇-水(GL-WR)四种体系中的集聚行为和胶束热力学;聚集行为参数包括临界胶束浓度(cmc)和抗衡离子的解离程度(α)以及胶束的热力学参数,包括标准吉布斯自由能(ΔG_m~o)、吉布斯迁移自由能(ΔG_(trans)~o)、吉布斯烷基链胶束化自由能(ΔG_(tail)~o)、标准焓变(ΔH_m~o)和标准熵变(ΔS_m~o),均被计算和讨论。研究表明在所有的研究体系中,cmc值随着疏水链的增加而减小,随着加入的醇结构中羟基数目的增加而增大,随温度的升高先变小,后变大呈U字形;胶束化过程都是自发进行的,并且在293.15 K下,胶束化过程是吸热的,在293.15 K上,胶束化过程是放热的;通过稳态荧光光谱法研究了表面活性剂在纯水、有机醇-水混合溶液中的微极性,结果表明,在相同溶剂中,随着烷基链长度的增加,溶液微环境的疏水性越强;对于相同的Gemini表面活性剂,随着加入含羟基数目越多的醇,其微环境的疏水性越强。并研究了Gemini表面活性剂在混合体系中形成胶束过程的焓-熵补偿曲线。     

SnS2纳米花/石墨烯纳米复合物的一步法合成及其增强的锂离子存储性能

SnS₂ is considered as an attractive anode material to substitute commercial graphite anodes of lithium-ion batteries due to its high specific capacity of 645 mAh·g^-1 as well as low cost. Nevertheless, it suffers poor large volume expansion during the lithiation/delithiation processes, leading to the loss of electrical contact and rapid capacity fading. Herein, by using a facile one-step solvothermal method, SnS₂ nanoflower/graphene nanocomposites (SnS₂ NF/GNs) were prepared, where flower-like SnS₂ hierarchical nanostructures consisting of ultrathin nanoplates, are tightly enwrapped in graphene nanosheets. As anode materials for lithium-ion batteries, the SnS₂ NF/GNs electrode exhibit superior electrochemical performance, with a reversible capacity of 523 mAh·g^-1 after 200 charge-discharge cycles. The enhanced Li storage performance was attributed to the synergistic effect of SnS₂ and graphene. The SnS₂ NF can effectively accommodate the volume change and shorten Li⁺ diffusion distance, while graphene nanosheets can further alleviate the volume expansion of SnS₂ and improve the electronic conductivity.     

氮、硫共掺杂的碳负载的钴@碳化钴:一种高效的非贵金属氧还原电催化剂

Development of high-efficiency and low-cost electrocatalysts for large-scale oxygen reduction reaction (ORR) remains a challenge. In this study, we employed melamine, trithiocyanuric acid, and cobaltous nitrate to fabricate a novel ORR electrocatalyst with cobalt and cobalt carbide supported on carbon co-doped with nitrogen and sulfur (hereafter referred to as MTC-0.1-900) by two-step pyrolysis. The MTC-0.1-900 was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Raman spectroscopy, Brunauer-Emmett-Teller (BET) specific surface area analysis, and X-ray photoelectron spectroscopy (XPS). The electrochemical performance for ORR was investigated by cyclic voltammetry and linear sweep voltammetry in 0.1 mol·L^-1 KOH solutions. The results showed that the onset potential and half-wave potential of MTC-0.1-900 were 29 and 5 mV superior to the commercial Pt/C catalyst, respectively. After 12000 s operation at the potential of -0.3 V (vs Ag/AgCl), the current retention capacities of MTC-0.1-900 and Pt/C were 97.1% and 76.7%, respectively. MTC-0.1-900 also showed better methanol tolerance than Pt/C. These unique properties of MTC-0.1-900 provide us with an alternative for replacing or reducing the use of Pt catalyst in metal-air battery cathode materials.     

自由来流湍流与三维壁面局部粗糙诱导平板边界层不稳定T-S波的数值研究

采用直接数值模拟（DNS）方法,研究了在自由来流湍流与三维壁面局部粗糙作用下平板边界层内诱导产生不稳定T-S波的物理问题.数值结果可知,在平板边界层内发现了二维和三维T-S波组成的波包空间序列以及求得了波包向前传播的群速度大小,从而证明了自由来流湍流与三维壁面局部粗糙作用是激励平板边界层内诱导产生不稳定T-S波的一种机制.随后,建立了平板边界层内被激发的二维和三维T S波的初始幅值与自由来流湍流度,三维壁面局部粗糙的流向长度、展向宽度及法向高度之间的关系.这一问题的深入研究,进一步完善了流动稳定性与湍流理论.     

脑胶质瘤磁共振弥散张量成像定量参数与VEGF、MMP-9表达的相关性

本研究旨在分析脑胶质瘤患者的磁共振弥散张量成像(DTI)参数与病变组织血管内皮生长因子(VEGF)和基质金属蛋白酶-9(MMP-9)表达的相关性,以及DTI参数对脑胶质瘤进行分级诊断的价值。根据病理分级将102例脑胶质瘤患者分为低级别组(47例)和高级别组(55例),均行MRI和DTI检查,定量测定表观弥散系数(ADC)、各向异性分数(FA)、相对ADC(rADC)、相对FA(rFA)值及相对轴向扩散系数(rAD)值;用免疫组化法检测VEGF和MMP-9表达情况。结果显示,高级别组患者的rADC、ADC、rAD、FA、rFA均低于低级别组(P<0.05);高级别组患者的VEGF和MMP-9阳性表达均高于低级别组(P<0.05)。rADC、ADC、rAD、FA、rFA与VEGF和MMP-9表达均呈负相关(P<0.05);rADC、ADC、rAD、FA、rFA对脑胶质瘤分级诊断的AUC均具有一定诊断价值(P<0.05)。本研究结果提示DTI定量参数与脑胶质瘤VEGF和MMP-9表达具有相关性,且有助于脑胶质瘤的分级诊断。